DRAGONLOCK™ Miniatures are hyper-detailed sculpts specifically designed to print on FDM 3D printers with NO SLICER SUPPORTS! Best of all, a standard mini costs UNDER TEN CENTS to print. Become your own miniature manufacturer today!

 

 

 

 

 

 

 

 

 

Actual prints, .25mm nozzle, no supports used, minor cleanup (less than 1 minute per miniature):

Sample prints straight from printer with no supports and NO CLEANUP:

(Skeleton minis from set ‘FDG0219 Skeleton Set 1’)

 

 

Suggested print settings (for best results print one miniture at a time):

.25mm Nozzle (Hatchbox PLA or eSUN PLA Pro recommended)

Temperature: 190˚

Layer height: .08mm (.05mm to .1mm will work as well)

First Layer: .2mm

Perimeters: 4

Solid top layers: 15

Solid bottom layers: 10

Infill: 10% grid

No supports

Speed: 20mm/sec (15mm external perimeters)

NO ‘Z HOP’

.4mm Nozzle (Hatchbox PLA or eSUN PLA Pro recommended)

Temperature: 190˚

Layer height: .08mm (.05mm to .1mm will work as well)

First Layer: .2mm

Perimeters: 3

Solid top layers: 10

Solid bottom layers: 10

Infill: 10% grid

No supports

Speed: 20mm/sec (15mm external perimeters,)

NO ‘Z HOP’